Third set side door access gyratory sifter exportation

/in /by

Third set side door access gyratory sifter exportation

We prepare to export our third set side door access gyratory sifter to one customer for perlite screening.

We have supplied one such model sifter for perlite screening and separation.

As we know, the perlite bulk density is very little, if screening perlite with high frequency vibrating sifter, the high frequency vibration may bring much more perite dust into the air, it is not good for screening. So low frequency gyratory screener is one best choice.

Then the perlite pellets may block the mesh aperture, the gyratory sifter fit with self-cleaning ball, so it could clean the mesh if the pellets block the mesh aperture.

But the material may block the mesh at last may because the moisture , the capacity  factory, the operator need bring the mesh out the screen to clean the mesh via hand or other method, it is the largest advantage of the side doors access gyratory sifter, because it could open the screener box from two side, and one little screener deck is very little and light, the work is very safe and easy, one worker could finish the mesh changing and cleaning work.

 

side door access sifter exporation

side door access sifter exporation

CE certificate of Mega Young

/in /by

Our Screening Equipment has past the CE certificate inspection and isuused us the CE certificate, it meet the CE standard and meet the EU security standards.

screener CE certificate

Gyratory Sifter For Exporation

/in /by

Gyratory Sifter For Exporation

The MH model gyratory sifter is the key production of Mega Young Screening Technology Co.,Ltd, we export severial sets each per year.

We prepare to export one new MH-TD36 model gyratory sifter to one Mexico customer, the customer has bought  3 sets such model gyatory sifter and one set side door access gyratory sifter  from the year 2015 to 2017, they are satisfied  on our gyratory sifter screening performance, so they sent us the fifth order two month ago to buy one new model screener, they use the screener to screening 2mesh to 60 mesh perlite material. In order to screen more size material, they order severial mesh size spare mesh, they could install their request screen mesh when they need.
For perlite screening and separation, because the perlite bulk density is very little, if use high frequency vibrating sifter, the high frency force could bring the perlite powder into the air, it is not good for next screening, so the reciprocating-gyratory motion sifter is one best choice for the perlite because there is no vertilce jump for the perlite on the sifter screener mesh surface, the material could pass the mesh aperture soon.

 

Gyratory sifter

Sugar Gyratory Sifter

/in /by

Sugar Sifter

Our gyratory sifter equipment has been applied in sugar industry successfully.

As we know, the sugar powder is easy to block the mesh aperture during sifting process, especially when do the sugar fines removing work, the self-cleaning device could not avoid the mesh blocked problem if the sugar with moisture. So the people must stop the sifter equipment work and remove out the mesh to clean the mesh aperture by hand, if the mesh changing work is hard, it will waste too much time for production stop.

So we have one new model sifting equipment, we call it side doors access gyratory sifter,

Details as following

http://www.megayoungscreen.com/gyratory-sifter-equipment/gyratory-vibrating-screen/

 

The screener could change mesh from two side of the gyratory sifter box, and one layer mesh be divided into several little deck, so each deck weight become very light, one people could handle it, and for this sifter, also there are self-cleaning balls under the sifter mesh, and two people could finish the whole mesh work changing work within 10 minutes, please check following video link:

http://www.megayoungscreen.com/video/side-access-doors-type-gyratory-screener_compress-2/

For above video, you could find the mesh changing work is very easy for our side door access gyratory sifter, it is easy to cleaning the mesh if the sugar is too moisture, it become one easy work.

 

gyratory vibrating sifter

Rectangular Gyratory sifter and round Tumbler sifter comparison

/in /by

Rectangular Gyratory Sifter and round Tumbler Sifter comparison

Mega Young Screening technology have rectangular gyratory sifter, round gyratory vibrating sifter and round gyratory tumbler sifter, the three model gyratory sifter all do the the reciprocating-gyratory motion one level plane or almost horizontal plane.

But still there are one major difference between the rectangular gyratory sifter and round gyratory sifter as following about the material moving path distance

1.Round gyratory sifter feed material flow motion as following

round gyratory sifter feed

From above pictures, the inlet of round gyratory sifter is in the center of top cover, so the bulk material will be feed from the center of the sifter, and it also will fall down on the center of the sifter  mesh, and the sifter outlets on the edge of the sifter casing structure

The bulk material flow bed moving path on the sifter mesh surface as following

round gyratory sifter moving path

The material will flow toward the edge of the sifter casing from the sifter mesh center, it could not move the whole sifter mesh surface,so the material flow path distance only a little longer than the 1/2 of the sifter deck diameter, for example, the sifter equipment diameter is 2m, the material movement path distance may only 1.2m, it is much shorter than the deck circle diameter 2m, so the sifting path is shorter than the screener deck diameter when adopt round gyratory  sifter.

2.Rectangular gyratory sifter feed material flow motion path as following

gyratory sifter material feed

From above pictures, the rectangular gyratory sifter  inlet is on one end of the top cover, so the material will be feed from one end of the sifter casting, and discharged from another end of the sifter casing, the material flow will pass the whole sifer mesh surface.

gyratory sifter material flow

The material will flow toward the end of the outlet after feed into the gyratory sifter equipment inlet, the material movement path will be along the whole length, and the material will to the gyratory motion along with the screener box, so the fact material moving path distance will be much longer than the sifter casing length, for example, the side door access gyratory sifter area is 1.2m*1.9m, the material flow moving path distance will be much larger than 1.9m, it is even 2 times of 1.9m, and the stroke of the screener is 60mm-88mm, the moving speed is higher, that is why the same   side access door gyratory sifter mesh area is 3-6 times of same area of round gyratory screener, for round gyratory tumbler sifter, the material along could use the 1/2 of diameter of the screener mesh, but for the side access door gyratory sifter, it could use even 2 times length of the gyratory screener mesh length, and have much higher movement speed

Proper gyratory sifter model for sugar

/in /by

Proper gyratory sifter model for sugar

As we know, the sugar is easy to absorb the moisture from the air then became very sticky, during the process for grading, scalping or finds removing with vibrating screener equipment, the sugar is easy to adhere to the mesh wire then block the mesh aperture, so it stop the screener equipment running to cleaning the mesh, but the mesh changing time affect the production line stop time, the shorter mesh chaning time, the better, in our MHG model gyratory sifter equipment is one kind screener that is easy to change the mesh, it only need about two labors to change the whole mesh within 10 mins, and it is save, because the screener mesh could be changed from two side of the screener box, one little mesh just 2-3KGS weight, for details, please check the details about our MHG model gyratory vibrating screen.

Gyratory vibrating sifter which is easy to change and clean the mesh deck

/in /by

Separation equipment which is easy to change and clean the mesh deck

For vibration separation equipment for material screening, the bulk material is easy to block the mesh aperture or worn out the mesh if the bulk material is sticky or strong abrasiveness, so the labor need stop the separation equipment running, or need stop the whole production line, then move out the previous mesh for cleaning or changing one new, the mesh changing time is very important, if it too long, it will affect the whole production line and bring to much lost too company.
In order to solve the problem, the MHG model side door access gyratory screener is one good choice, only two people could finish the mesh changing work within 10 mins, and it is much safe. because one mesh deck only weight about 2–3KGS, for details, please check our MHG model gyratory vibrating sifter

 

gyratory vibrating sifter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gyratory Sifter For Perlite screening

/in /by

Gyratory Sifter For Perlite Screening

As we know , the bulk density of perlite material is very low, it is very light, so the low frequency gyratory sifter equipment is better for perlite material screening, because if the frequency is too high, it will bring too much dust in the air , and it is hard to pass the mesh aperture again.

Mega Young Screening Technology have exported severial sets of gyratory sifter equipment for perlite industry application. And the screening result is very good.

gyratory sifter for perlite

gyratory sifter for perlite

Advantage of Side Door Access Gyratory Vibrating Screen

/in /by

Advantage of Side Door Access Gyratory Vibrating Screen

The best advantage of the side door access gyratory vibrating screen is that could save the mesh changing time, so it could reduce the production line stop time.

The screen mesh deck consist 2-8 pieces of little panel deck, so the area and weight will be 1/8–1/2 of previous one layer complete deck, so one person could change the mesh in one narrow space, it is very convinence.

gyratory vibrating screen

Gyratory vibrating screen